Seriud WN300: How to set up with a PC without wireless feature352
Issuing time:2018-07-12 13:26 Connect to an Existing WiFi Network To extend therange of your WiFi network, you must connect the extender to your existing WiFinetwork. You can set it up with a wireless device such as smart phone ( See How to set up WN300 with a smartphone / laptop / tablet ) or a PC without wireless feature. How to set up with a PC without wireless feature① Plug the extender into an electrical outlet proximity to the WiFi router or access point and wait for the Power Lamp to light on. ② Use a network cable connect the extender and your PC. ③ Run a browser and input 192.168.10.1 in the address bar. ④ Click LOGIN on the Login interface. ⑤ It will scan the wireless network signals around. Select the WiFi network you want to extend. ⑥ In the SSID field, set the new SSID for your extender, or use the default SSID which is your existing home WiFi name appended with “-plus”at the end. In the Password field, type the password of the existing WiFi network and click the Apply button. For Example: Existing WiFi Network name (SSID): myhome New Extender WiFi Network name (SSID): myhome-plus Existing WiFi Network Password: 12345678 New Extender WiFi Network Password: 12345678 ⑦ Wait about 2-3 minutes for it restarting itself. ⑧ After the setup, reconnect your computer or WiFi device to the new extended WiFi network. ⑨ Unplug the extender and move it to a new location that is about halfway between your router and the area with a poor router WiFi signal. The location that you choose must be within the range of your existing WiFi router network. Locate it several times to find the optimal location. ⑩ Reconnect your WiFi device to the new extended network. Any question pls contact seriudstore@gmail.com. Related Articles: Seriud WN300: Set up with a smartphone / laptop / tablet Seriud WN300: Set up with a PC without wireless feature Seriud WN300: How to set up with WPS |
Futian District, Shenzhen, China